Contour Gen 2 Flex (Side Bend)
Installation Guide
3
Components and Tools Required
1
2
3
4
5
6
7
8
9
10
Contour Gen 2 Flex Side Bend Light Engine
GEXNFRL-1 Flex Rail or GEDSRLXX-3 Tetra SNAP Rail
GEXNFMC-1 Flex Mounting Clip
#6, #8 or #10 (M2, M3 or M4) self-drilling pan headed screws
#6 (M2) screws
Minimum 22 AWG (0.33mm
2
) tie-wire
24 Volt power supply
UL approved 18 AWG (0.82mm
2
) supply wire
UL approved 22-14 AWG (0.33-2.08mm
2
) twist-on wire connectors
GEXNFEC-1 Flex End Cap
Electrical grade silicone.
Examples of electrical grade silicone:
• Momentive RTV 6702 (white) / RTV 6708 (clear) - Silicone Rubber Adhesive Sealant
• Momentive RTV 162 (White) - Silicone Rubber Adhesive Sealant-Electrical Grade
• Dow Corning 3140 (clear) - Non-Corrosive Flowable
• Dow Corning 3145 (clear or gray) - Non-Corrosive Non-flowable
• Dow Corning RTV 748 (white) - Non-Corrosive Sealant
Cutting Resolution Table
Light Engine Color
Cutting Resolution
Red, Red-Orange,
Amber,Green, Blue, White
4 in. (101.6 mm)
1
2
Weather box GEXNWB2
Contour Light Guide connector
Contour Light Guide 90° inside corner
Contour Light Guide 90° outside corner
Contour Light Guide 90° planar corner
Optional / Required for Wet Locations
Optional
12
13
14
16
15
3
4
5
6
7
8
9
10
11
11
16
12
13
14
15
100” (2.54 m)
95.4” (2.42 m)
