![background image](http://html1.mh-extra.com/html/daikin/super-multi-nx-ffq25b8v1b/super-multi-nx-ffq25b8v1b_service-manual_4061781288.webp)
SA Indoor Unit - FFQ, FCQ, FDBQ, FBQ, FHQ Series
SiBE121021_C
276
Operation Manual
7
English
VRV System
Refer to figure 1 on page [1]
Operate in the following order.
Refer to figure 1-1, 2 on page [1]
5. OPERATION PROCEDURE
1
ON/OFF
Press ON/OFF button
NOTE
Refer to figure 1-1,3 on page [1]
2
1
The setting temperature range of the remote
controller is 16
°
C to 32
°
C.
See the operation manual provided with the
air conditioner.
•
Operating procedure varies with heat
pump type and cooling only type. Contact
your Daikin dealer to confirm your system
type.
•
To protect the unit, turn on the main power
switch 6 hours before operation.
•
If the main power supply is turned off
during operation, operation will restart
automatically after the power turns back
on again.
COOLING, HEATING, AUTOMATIC,
FAN, AND PROGRAM DRY
OPERATION
•
AUTOMATIC OPERATION can be
selected only by Heat pump split system.
•
For cooling only type, “COOLING”, and
“FAN” and “DRY”operation are able to
select.
〈〈
FOR SYSTEMS WITHOUT COOL/
HEAT CHANGEOVER REMOTE
CONTROL SWITCH
〉〉
OPERATION MODE
SELECTOR
Press OPERATION MODE SELECTOR
button several times and select the
OPERATION MODE of your choice as
follows.
•
The function of this program is to
decrease the humidity in your room with
the minimum temperature decrease.
•
Micro computer automatically
determines TEMPERATURE and FAN
SPEED.
•
This system does not go into operation if
the room temperature is below 16˚C.
OPERATION lamp lights up or goes off and
the system starts or stops OPERATION.
•
Do not turn OFF power immediately after
the unit stops. Then, wait no less than 5
minutes.
Water is leaking or there is something else
wrong with the unit.
〈〈
FOR SYSTEMS WITH COOL/HEAT
CHANGEOVER REMOTE CONTROL
SWITCH
〉〉
OPERATION MODE
SELECTOR
(1) Select OPERATION MODE with the
COOL/HEAT CHANGEOVER REMOTE
CONTROL SWITCH as follows.
COOLING OPERATION................... “
”
HEATING OPERATION.................... “
”
COOLING OPERATION ............ “
”
HEATING OPERATION............. “
”
AUTOMATIC OPERATION................“
”
•
In this operation mode, COOL/HEAT
changeover is automatically conducted.
FAN OPERATION............................. “
”
DRY OPERATION .............................“
”