![background image](http://html1.mh-extra.com/html/daikin/stylish-series/stylish-series_service-manual_2459098123.webp)
2
|
Components
Service manual
123
(C)(F)TXA15~50A(W)(S)(T) + (C)(F)TXA15~50B(B)(S)(T) + RXA42+50A +
RXA20~35A + RXA42+50B
Split Stylish R32
ESIE18-03C – 2020.02
f
d
e
a
Tie strap
b
Insulation
c
Thermistor wire
d
Clip
e
Thermistor
f
Thermistor holder
3
Cut and remove the insulation.
4
Pull the clip that fixes the thermistor.
5
Remove the thermistor from the thermistor holder.
6
Cut all tie straps that fix the thermistor harness.
7
Disconnect the thermistor connector from the appropriate PCB and remove
the thermistor.
INFORMATION
Some of the thermistors are wired to the same connector. See connector and pin
information of the thermistors at the start of the electrical check procedure and
145]. ALWAYS replace the complete set of thermistors wired
to the same connector.
8
When removing the complete set of thermistors wired to the same connector:
▪
Remove all other thermistors wired to the connector from their thermistor
holder,
▪
Disconnect the thermistor connector from the appropriate PCB,
▪
Remove the complete set of thermistors.
9
To install the thermistor, see
122].
To install the thermistor
1
Pull the clip and install the thermistor in the specific thermistor holder. Make
sure the clip is in the correct position (blocking the thermistor).
Summary of Contents for Stylish Series
Page 166: ......
Page 167: ......
Page 168: ...ESIE18 03C 2020 02 Copyright 2018 Daikin Verantwortung f r Energie und Umwelt...