10 Configuration
Installation manual
11
FTXTJ-A(W)(B)
Daikin room air conditioner
3P695637-3C – 2023.03
6
Change status to ON by
and
.
7
Press
to confirm the selection.
Result:
The indoor unit enter test run mode, during which
normal operation is not possible.
Test run OFF
Test run ON
During test run
Result:
Test run operation will stop automatically after about
30 minutes.
8
Test run mode will stop if the ON/OFF button is pressed.
Result:
The indoor units leave test operation mode.
9
Check the function of operation modes.
INFORMATION
You CANNOT set the Econo, Outdoor unit silent and
Powerful operation or change the temperature setpoint
during the test run.
10
Check the error code history. If required, solve the cause of the
errors and perform the test operation again.
INFORMATION
▪ The test run is only completed if the indoor unit does
not report any error code.
▪ See the service manual for the complete list of error
codes and a detailed troubleshooting guideline for each
error.
10
Configuration
INFORMATION
For “Configuration” using the wireless remote control, refer
to the
user reference guide
located on
▪
Indoor unit setting:
brightness of the Daikin eye, open
the front panel, wireless LAN connection, vertical
airflow function, indoor unit installation position, keep
dry function
▪
Wireless remote control setting:
LCD contrast, LCD
brightness, LCD turn off time, automatic send after
select, channels of the indoor unit infrared receiver
11
Troubleshooting
11.1
Solving problems based on error
codes
Fault diagnosis by the wireless remote control
If the unit runs into a problem, you can identify the fault by checking
the error code by the wireless remote control. It is important to
understand the problem and take measures before resetting the
error code. This should be done by a licensed installer or your local
dealer.
To check the error code by the wireless remote control
1
Press
to enter the main menu and navigate to the wireless
remote control settings menu using
and
.
Wireless remote control
setting menu
Software version (self-
diagnosis menu)
2
Press
to enter the menu.
3
Navigate to the software and version screen using
and
.
4
Keep
pressed for at least 5 seconds to enter the self-
diagnosis menu.
5
Navigate to the error code indication screen using
and
.
Press
to confirm your selection.
Error code indication
Error code list
1
00
6
Aim the wireless remote control at the unit and scroll through
the list of error codes using
and
, until you hear a long
beep.
Result:
A long beep indicates the corresponding error code.
7
Press
to return to the home screen or press
to return to
the self-diagnosis menu.
INFORMATION
See the service manual for:
▪ The complete list of error codes
▪ A more detailed troubleshooting guideline for each
error
12
Disposal
NOTICE
Do NOT try to dismantle the system yourself: dismantling
of the system, treatment of the refrigerant, oil and other
parts MUST comply with applicable legislation. Units
MUST be treated at a specialised treatment facility for
reuse, recycling and recovery.
Summary of Contents for FTXTJ30A2V1BW
Page 14: ......
Page 15: ......
Page 16: ...3P695637 3C 2023 03 Copyright 2023 Daikin Verantwortung f r Energie und Umwelt...
