manualshive.com logo in svg

Daikin FTXM-V Series, Service Manual

Share
Download
Daikin FTXM-V Series Service Manual Download Page 52

Main Functions

SiUS042113E

48

Part 4 Functions and Control

• 

Setting Displays

Normal

1. 

Press 

 .

•  The day of the week and the reservation number of the current day will be displayed.

2. 

Press 

 to select the day of the week and the 

• Pressing 

 displays the reservation details.

• 

 . 

The mode is switched to setting mode. Proceed to 

Setting mode

 

STEP

 

4

. 

3. 

Press 

• “

 

 ” is displayed on the LCD and WEEKLY TIMER operation is activated.

To deactivate WEEKLY TIMER operation

  Press 

 while “ 

 ” is displayed on the 

LCD.

• “ 

 ” disappears from the LCD.

•  The TIMER lamp goes off.

•  To reactivate the WEEKLY TIMER operation, press 

 again.

•  If a reservation deactivated with 

 is activated once again, the last reservation mode 

will be used.

NOTE

• 

 again to reactivate the 

WEEKLY TIMER operation.

Summary of Contents for FTXM-V Series













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands