4
|
Components
Service manual
49
RXJ20~50A + FTXJ-A(W)(S)(B)
Split Emura 3 R32
ESIE22-04 – 2022.04
DANGER: RISK OF ELECTROCUTION
Wait for at least 10 minutes after the circuit breaker has been turned OFF, to be sure
the rectifier voltage is below 10 V DC before proceeding.
2
Loosen and remove the screws that fix the top plate.
a
b
a
a
a
a
a
a
Screw
b
Top plate
3
Remove the top plate.
To remove the front plate
INFORMATION
This procedure is just an example and may differ on some details for your actual unit.
Prerequisite:
Remove the top plate, see
1
Loosen and remove the screws that fix the front plate.
a
a
a
a
a
a
a
Screw
b
Front plate
2
Remove the front plate.
To remove the switch box
INFORMATION
This procedure is just an example and may differ on some details for your actual unit.
Prerequisite:
Stop the unit operation via the user interface.
Prerequisite:
Turn OFF the respective circuit breaker.
Prerequisite:
Remove the required plate work, see
48].
1
Remove the insulation on the upper side of the switch box.
draft – 22/04/2022 08:50
