3
|
Troubleshooting
Service manual
13
RXJ20~50A + FTXJ-A(W)(S)(B)
Split Emura 3 R32
ESIE22-04 – 2022.04
3 Troubleshooting
3.1 To display the error code on the wireless remote controller
1
Press
to enter the main menu and navigate to the wireless remote control
settings menu using
and
.
Wireless remote control setting menu Software version (self-diagnosis menu)
2
Press
to enter the menu.
3
Navigate to the software and version screen using
and
.
4
Keep
pressed for at least 5 seconds to enter the self-diagnosis menu.
5
Navigate to the error code indication screen using
and
. Press
to
confirm your selection.
Error code indication
Error code list
1
00
6
Aim the wireless remote control at the unit and scroll through the list of error
codes using
and
, until you hear a long beep.
Result:
A long beep indicates the corresponding error code.
7
Press
to return to the home screen or press
to return to the self-
diagnosis menu.
3.2 To reset the error code via remote controller
Prerequisite:
Problem is solved.
1
Press the ON/OFF button of the remote controller to reset the error.
3.3 To reset the error code via outdoor unit
Prerequisite:
Problem is solved.
1
Perform a power reset to reset the error code.
3.4 To perform a test run
INFORMATION
If the unit runs into an error during commissioning, see the service manual for the
detailed troubleshooting guidelines.
draft – 22/04/2022 08:50