08 + ERLQ004~008
Daikin Altherma - Low Temperature Split
4P313774-1 – 2012.05
Installer reference guide
28
7 Installation
If the unit is installed on brackets to the wall, it is advised to use the
EKFT008CA option kit and to install the unit as follows:
7.2.2 To install the outdoor unit
1
Lift the outdoor unit as described in To remove the accessories
from the outdoor unit.
2
Install the outdoor unit as follows:
3
Remove the protective cardboard and instruction sheet.
7.2.3 To prepare drain work
Q
Avoid installation places where water leaking from the unit due
to a blocked drain pan, cause damage to the location.
Q
Make sure that condensation water can be evacuated properly.
Q
Install the unit on a base to make sure that there is a proper
drainage in order to avoid ice accumulation.
Q
Prepare a water drainage channel around the foundation to
drain waste water surrounding the unit.
Q
Avoid drain water flowing over the footpath, so that it does not
become slippery in case of ambient freezing temperatures.
a
Maximum snowfall height
b
EKFT008CA option kit
>250
>25
0
>300
>250
(mm)
a
b
b
CAUTION
Do NOT remove the protective cardboard before the unit is
installed properly.
a
Air outlet
NOTICE
The pedestal MUST be aligned with the backside of the U-
beam.
a
Protective cardboard
b
Instruction sheet
2x
1
2
a
a
b
a
