![background image](http://html2.mh-extra.com/html/daikin/dge601a51/dge601a51_installation-manual_5690121064.webp)
62
Installation Manual 3P581074-1D
DGE601A51/DGE602A51
English
5.3.2
Setting the demand address and enabling demand setting
Set the demand address.
1. Press the
BS1
button for 5 seconds or more.
The LEDs and segments will be in the state shown below.
LED (segment) display
Outdoor unit of the LED display
Outdoor unit of the
segment display
H1P
H2P
H3P
H4P
H5P
H6P
H7P
SEG1
SEG2
SEG3
2
0
0
2. Press the
BS2
button 2 times. (Select the setting item.)
3. Press the
BS3
button.
You can now find out the current demand address setting by the LED (segment).
4. Press the
BS2
button to change to any demand address.
(Set the demand address number within the range of 0 to 31.)
5. Press the
BS3
button 2 times to confirm the demand address setting.
Next, enable demand setting.
6. Press the
BS2
button 12 times. (Select the setting item.)
7. Press the
BS3
button.
You can now find out the currently set value (enabled/disabled) by the LED (segment).
8. If it is disabled, press the
BS2
button 1 time to enable it.
The LEDs and segments will be in the state shown below.
Setting items
LED (segment) display
Outdoor unit of the LED display
Outdoor unit of
the segment
display
demand setting
(enabled)
H1P H2P H3P H4P H5P H6P H7P SEG1 SEG2 SEG3
0
0
1
9. Press the
BS3
button 2 times to confirm the set value.
10. Press the
BS1
button 1 time to return to the normal mode.
NOTE
If you want to use the demand control of the External Control Adapter for Outdoor Unit,
you do not need to perform this setting.
01_EN_3P581074-1D.indd 62
2021/06/22 13:00:28