Installation Manual 3P581074-1D
DGE601A51/DGE602A51
33
English
Peel away the sheath and coating of the power wire to match the dimensions shown
below. You can also refer to the terminal block cover for the coating peeling allowance.
<Power wire (sheath, coating)>
<Terminal block cover>
10 mm
10 mm
L: 45 mm
E: 40 mm
N: 50 mm
L
N
E
Round crimptype
terminal (2-M4)
* Use the included round crimp-type
terminal (2-M4) for the end of the
earth wire only (field supply possible)
When peeling, be careful not to scratch the finish of the exposed part of the cable.
10 mm
Good example
Bad example
Frayed
Too short
Bent
Too long
(4)
While engaging the tab in the area marked with a triangle, attach the terminal block
cover and secure it with the screw.
01_EN_3P581074-1D.indd 33
2021/06/22 13:00:20
