![background image](http://html2.mh-extra.com/html/daikin/dge601a51/dge601a51_installation-manual_5690121054.webp)
52
Installation Manual 3P581074-1D
DGE601A51/DGE602A51
English
5.2
Setting addresses with navigation remote controller
(BRC1E*)
This section describes how to set addresses using navigation remote controller BRC1E*.
NOTE
For how to set addresses for ventilation equipment (Heat Reclaim Ventilation units) and
various adaptors, refer to their respective documentation.
Names of buttons and display
Below are the names of the buttons and display of navigation remote controller BRC1E*.
A
Liquid-crystal display (with backlight)
B
Up button
C
Menu/OK button
D
Right button
E
Cancel button
F
Down button
A
B
F
C
D
E
The operation procedure of the navigation remote controller is as follows.
The operation steps will be explained in the following order.
“Remote controller group
MAIN”
,
“Remote controller group SUB”
,
“Indoor unit Airnet address”
,
“Outdoor
unit Airnet address”
.
NOTE
You cannot perform the following procedure when the display backlight is off.
In this case, press any key to turn on the backlight before starting the procedure.
01_EN_3P581074-1D.indd 52
2021/06/22 13:00:26