Daikin DCM601A51 Technical Data Manual Download Page 280

Page: 280 / 405

276

Commissioning Manual

ED721208

Commissioning Manual EM11A021

DCM601A51 intelligent Touch Manager

5-2 Dealer Option Setup

The following describes the procedure to enable dealer options.

1. Log into SE Mode from the Menu List screen and display the Service Settings tab (see page 7).

Touch the Dealer Option Switch button on the Service Settings tab to display the Dealer Option

screen (see page 10).

(1)

(2)

Enable

(1)

is a list of enabled dealer options.

Disable

(2)

is a list of disabled dealer options.

2. To enable a new optional function, select it from

(2)

and touch the Add button. It is added to

(1)

and enabled.

To disable, select the optional function from

(1)

and touch the Remove button. Touch the Yes

DWVVQPQPVJGEQPƂTOCVKQPFKCNQIVJCVVKUOQXGFVQ

(2)

and disabled.

3. When finished, touch the OK button. A confirmation dialog with the message “Settings have

been changed. Reboot now to enable new settings?” appears. Touch the OK button and restart

the iTM unit.

Summary of Contents for DCM601A51






















































































































































































































































































































































































































Search results

Summary of Contents for DCM601A51

Reviews:

Brands by name

Popular brands

Daikin DCM601A51, Technical Data Manual

Search results

Summary of Contents for DCM601A51

Reviews:

Brands by name

Popular brands