Daikin DCM601A51, Technical Data Manual

Page: 184 / 405

180
Installation Manual ED721208
Installation Manual 3P291714-3
DCM601A52 iTM plus adaptor
13 English
2.1 Connecting intelligent Touch Manager
The iTM plus adaptor is a device that enables you to control more air conditioners with the
intelligent Touch Manager. It needs to be connected to an intelligent Touch Manager to
provide this capability.
2.1.1 6GTOKPCNUNQECVKQPCPFEQPEGRVWCNEQPPGEVKQPFKCITCO
Connect the terminals located in the “plus ADP IF” section of the iTM plus adaptor to the
corresponding terminals located in the “plus ADP IF” section on the rear face of your intel-
NKIGPV6QWEJ/CPCIGT0QVGVJCVVJGUGVGTOKPCNUJCXGRQNCTKV[$GUWTGVQEQPPGEVVJG
positive wire to the “+” terminal and the negative wire to the “–” terminal, respectively.
In addition, the intelligent Touch Manager must be connected as a terminal to the wiring.
6GTOKPCNUNQECVKQPCPFEQPEGRVWCNEQPPGEVKQPFKCITCO
A KPVGNNKIGPV6QWEJ/CPCIGT4GCTHCEG
B iTM plus adaptor
C RNWU#&2+(KPVGNNKIGPV6QWEJ/CPCIGT
D RNWU#&2+(K6/RNWUCFCRVQT
E iTM plus adaptor on which termination resistor must be enabled
2.1.2 4GSWKTGOGPVUVJCVOWUVDGOGV
r
Cable type: CPEV or FCPEV cable
r
Core thickness:
φ
0.65 - 0.9 mm
r
Cable length: 50 meters or less in total for overall plus ADP IF wiring