Daikin DCM601A51, Technical Data Manual

Page: 251 / 405

247
ED721208 Commissioning Manual
6
Commissioning Manual EM11A021
DCM601A51 intelligent Touch Manager
42
2. (1) is an air conditioner list displaying all Group Addresses. When no management points are
registered, columns other than Group Addr. are displayed blank.
The displayed contents are as indicated in the table below.
Column Displayed information Value range
Group Addr. Group address number 1:1-00 to 8:4-15
Name
Displays the name of the
connected unit.
Characters permitted by Mgmt. Point Data
Register.
OD-Unit Addr.
Refrigeration system number of
the connected unit.
“----” is displayed for units for
which the refrigeration system
number could not be acquired.
VQ
Changeover Option
Whether Changeover Option is
available or not for the connected unit.
#DNG0#5GNGEVCDNG
*1
Err Code
Error code detected in the connected unit.
Blank when there are no errors.
Possible Error Code values
Connection
Unit connection status
Blank when normal.
%QOO'TT0#/CKPVGPCPEG
*2
Type
Type of the connected unit.
Blank when type is not
registered.
+PFQQT8GPVKNCVQT%JKNNGT&KQ
*1 See the table below for the correspondence between the content displayed in the Changeover Option column and its meaning.
*2 Comm Err : Group address of the connected unit with communication error.
0##ITQWRCFFTGUUPQVTGIKUVGTGFCUCOCPCIGOGPVRQKPV
Maintenance : A group address of a connected unit under maintenance.
Changeover
Option
Meaning
Availability for selection
Release
button
Setup button
Able Unit with Changeover Option. ×
0# There is an indoor unit with Changeover Option within the same refrigeration system. × ×
Selectable There are no indoor units with Changeover Option within the same refrigeration system. ×
--- %QPPGEVKQPKUp0#qQT6[RGKUQVJPFQQTq × ×
[Legend] : Not greyed out ×: Greyed out
3. Select the indoor unit for which you want to set the Changeover Option from (1) and touch the
Settings button (2) . The Changeover Option becomes “Able”. At that moment, the Changeover
1RVKQPHQTVJGQVJGTKPFQQTWPKVUKPVJGUCOGTGHTKIGTCVKQPU[UVGODGEQOGUp0#q
4. Select the indoor unit for which you want to release the Changeover Option from (1) and touch
the Release button (3) . The Changeover Option becomes “Selectable”. At that moment, the
Changeover Option for the other indoor units in the same refrigeration system also becomes
“Selectable”. Touching the Refresh button (4) updates the contents displayed in (1) . Close the
screen using the Close button.