SALC-212-174
17
4.3.3 Setting value check
A current range (primary current), and an alarm-output set point are checked.
Check is RESET/SHIFT and － are pushed simultaneously and performed.
The change of a set point is carries out by ＋ and － . DISPLAY is pushed in case it returns to the
original measurement display. And, if a switch is not operated for 10 seconds after a set point check,
it will return to the original measurement display automatically.
Note(
８
) It is not displayed if there is no option.
DISPLAY
or
No operation
10 seconds
RESET/SHIFT
＋
－
＋
－
－
＋
A(V) display
A(U) display A(W) display
Primary current
Factor display
Alarm factor return method
Contact delay time
(
８
)
－
＋
Demand current time interval
Demand current upper limit value
Setting value check
Measurement display
Upper limit setting value
Alarm factor
Time interval
Return
method
Contact delay time
