SALC-212-174
15
4.2.3 Setting display
It is the display at the case of various setting. There are three types of setting modes according to the
contents of a setting.
Operation and the contents of setting (detail) in setting mode, please refer to "5 Setting".
① Setting mode 1
Setting of a measurement display factor, an
alarm output, and an alarm value, and
backlight is performed.
And, an alarm output can be tested in this
setting mode.
Setting mode 1
(No.111 Display pattern)
② Setting mode 2
Setting of measurement range, analog output,
external operation input, and measurement
display ON/OFF is performed.
And, it can initialize settings in this
setting mode.
Setting mode 2
(No.211 Voltage range)
③ Setting mode 3
Setting of an input circuit is performed.
And, analog output can be adjusted in this
setting mode.
Setting mode 3
(No.311 Input circuit phase line change)
New setting
Now setting
Setting No.
Setting factor
New setting
Now setting
Setting No.
New setting
Now setting
Setting No.
