S
ETTING
I
NTERNAL
F
UNCTIONS
W
ELDING
C
ONDITION
C
HAPTER
6
6-32
6.7.2.17 F22: Operation sound switching
Set the operation sound not to be emitted.
•
[ON]: Pressing any key on the operation panel enables to sound the operation sound.
•
[OFF]: Pressing any key on the operation panel does not enable to sound any operation sound.
6.7.2.18 F23: Sleep mode switching time
When the welding power source is not operated for a fixed period of time, it can be turned into the sleep
mode.
•
[0]: disables the function.
•
[1] to [10]: enables the function.
Set the transition time to the sleep mode in the range of 1 to 10. During the sleep mode, power
consumption is reduced.
–
In the sleep mode, the dot at the first digit on the
left/right digital meters flashes. All the other
displays on the operation panel are turned OFF.
–
Any operation during the sleep mode restores the
condition to the previous state.
A
V
r
㧑
WARNING
IPM.
sec.
JOB No.
Hz
