Daihen OTC Welbee Inverter W400, Owner'S Manual

Page: 126 / 158

D
ATA
B
ACKUP
(U
TILIZATION OF DATA
)
A
DMINISTRATOR
F
UNCTIONS
C
HAPTER
7
7-10
• Managing the error history
TIPS
• For the USB flash drive, use the version 1.0. 1.1 or 2.0 with backward compatibility.
• The USB flash drive to be used should be formatted as FAT32.
• Compatibility of the following USB flash drives has been confirmed.
Model No.: SFU22048E3BF2SA-W-D0-111-STD (swissbit)
Model No.: SFU22048E1BP2TO-W-D0-111-STD (swissbit)
• There is software allowing you to easily display waveforms and edit welding conditions. You
can download it from our home page.
URL: http://www.daihen.co.jp/products/welder/software/en.html
7.3.1 Setting of welding conditions/internal functions
The following contents can be stored in the "DAIHEN_OTC_WELDING_PRAMETER.CSV" file.
• All the welding condition data recorded in memory
• The internal function values at the time of data backup
The current welding conditions set with the operation panel will not be saved. (If necessary, record them
in memory beforehand.)
The welding condition data recorded in the memory will be output in the way that the JOB Nos.
(registration Nos.) are displayed in a vertical line and the parameter values in a horizontally line.
• The backup data (electronic information) may be altered or lost when affected by static
electricity, impact or repair work. . Important information should also be stored as
printed document.
Please note that OTC will not be liable for any alteration or loss of electronic
information.
Column Item Description Unit Column Item Description Unit
A job_num JOB No.
-255 to -155,
1 to 100
ＡＡ
wmode_H
Process information
1
(*2)
Ｂ
spot_tim
Arc Spot
time
0.1(s)
ＡＢ
wmode_L
Process information
2
(*2)
Ｃ prf_tim Pre-flow time 0.1(s) ＡＣ pre_feed Initial feed speed 0.1(m/min)
Ｄ pre_iset Initial current 1(A) ＡＤ wld_feed Welding feed speed 0.1(m/min)
Ｅ
pre_vset Initial voltage 0.1(V)
ＡＥ
cre_feed Crater feed speed 0.1(m/min)
"-" is shown for unused JOB No.
Parameter of JOB No.1
Parameter value
JOB No.