Daihen OTC Welbee Inverter W400, Owner'S Manual

Page: 49 / 158

4-15
Chapter 4 Connection
C
ONNECTION OF
E
XTERNAL
E
QUIPMENT
C
ONNECTION
C
HAPTER
4
4.5.1.1 Configuration example for connection
*1: The welding power source is equipped with a built-in interface.
No. Product name/Model Remarks
1 Welding power source
2 Interface: IFR-101WB
Connection robot controller cable (optional) is also
available. (
Refer to instruction manual of Interface)
3 Wire feeder
Wiring for wire feeder needs to be changed.
(
4.6.1
-
Wiring to wire feeder)
4 Welding torch: K2331 type curved torch
5
Uni-cord power cable:
K5369(1.1 m), K5370(1.2 m)
6 Control cable for wire feeder: BKCPJ-1010 (10 m)
For details on cables, see: ( 2.2.3.2
-
Details on
extension cables and hoses)
7 Cable at torch side: BKPDT-8012 (10 m)
8 Cable at base metal side: BKPDT-8012 (10 m)
9 Gas hose: BKGG-0610 (10 m)
10 Gas regulator To be prepared by the customer.
11
Conduit: Z318P50
(Guide adaptor attachment part: 9/16-18UNF) When using the conduit 7/16-20UNF, guide adaptor
L7810D04 is also required.
2
1
3
4
9
6
5
8
7
10 11
Signal line
(*1)
Pack wire
Gas cylinder
Gas shortage/wire shortage
detection circuit
Manipulator
Robot
controller
Control cable
(17 core)
Socket for
the wire
feeder
Output terminal (Torch side)
Output terminal
(Base metal side)
Voltage detection terminal
for base metal side
Base metal
Internal printed circuit board
Case
ground