Dahua IPC-HFW2431T-ZS-S2 Operation Manual Download

Page: 2 / 247

Foreword

General

This manual introduces the functions, configuration, general operation, and system maintenance of

network camera.

Safety Instructions

The following signal words might appear in the manual.

Signal Words

Meaning
Indicates a medium or low potential hazard which, if not avoided,

could result in slight or moderate injury.
Indicates a potential risk which, if not avoided, could result in

property damage, data loss, reductions in performance, or

unpredictable result.

Provides additional information as a supplement to the text.

Revision History

Version

Revision Content

Release Time

V2.1.8

●

Added product material information.

●

Updated the information of illuminator.

●

Updated the language.

●

Updated the information of audio.

October 2023

V2.1.7

Added the information of 4G.

April 2023

V2.1.6

Added the information of floodlight.

December 2022

V2.1.5

Updated the information of backlight.

October 2022

V2.1.4

Updated the information of alarm audio.

June 2022

V2.1.3

Updated the description of encode bar.

November 2021

V2.1.2

●

Updated "4.2.4.1 Adjustment".

●

Updated "4.5.1.1.2 Picture".

●

Updated "4.5.1.1.11 Image Correction".

●

Updated "4.5.1.4 Splicing".

●

Updated "4.5.2.1 Video".

●

Updated "4.8.2 Date & Time".

September 2021

V2.1.1

●

Updated "4.8.3.2 Adding User Group".

●

Updated "5.18 Setting Relay-in".

July 2021

V2.1.0

Updated "5.7 Setting Smart Plan"

July 2021

V2.0.9

Updated "4.5.2.1 Video".

May 2021

Operation Manual

Summary of Contents for IPC-HFW2431T-ZS-S2
























































































































































































































































Search results

Summary of Contents for IPC-HFW2431T-ZS-S2

Reviews:

Related manuals for IPC-HFW2431T-ZS-S2

Brands by name

Popular brands

Dahua IPC-HFW2431T-ZS-S2, Operation Manual

Search results

Summary of Contents for IPC-HFW2431T-ZS-S2

Reviews:

Related manuals for IPC-HFW2431T-ZS-S2

Brands by name

Popular brands