Parameter
Description
Customized Picture Name
Click Setting to set picture name.
●
Date&Time is required, and it is selected by default.
●
Select the other fields of the name, and the corresponding
instruction will be displayed on the screen.
●
Double-click the symbols under Separator, you can customize
the separator.
●
Double-click Custom, you can customize the files of the picture
name.
●
Click the arrow under Ordering, and you can adjust the ordering
of the file.
Date&Time and Millisecond is a whole, click the arrow of any
one of the two fields, the two moves together.
●
The real-time value of Millisecond will be displayed for precise
snapshot, and for schedule and normal event, the millisecond
displays 0000.
Emergency (Local)
Select Emergency (Local), and when the FTP server does not work,
all the files are saved to the internal SD card.
Step 4
Click Save.
Step 5
Click test to test whether FTP function works normally.
4.7.3.4 NAS
This function can be enabled only when NAS was selected as a destination path. Enable this
function, and you can save all the files in the NAS.
Procedure
Step 1
Select Setting > Storage > Destination > NAS.
Figure 4-99 NAS
Step 2
Select the Enable check box to enable NAS function, and select NAS protocol type.
●
NFS (Network File System): A file system which enables computers in the same
network to share files through TCP/IP.
●
SMB (Server Message Block): Provides shared access for clients and the server.
Step 3
Configure NAS parameters.
Table 4-36 Description of NAS parameters
Parameter
Description
Server Address
The IP address of the NAS server.
Operation Manual
111
Summary of Contents for IPC-HFW2431T-ZS-S2
