Dahua IPC-HFW2431T-ZS-S2, Operation Manual

Page: 70 / 247

Table 4-16 Description of floodlight settings parameters
Parameter Description
Brightness
Change the value to adjust the floodlight brightness. The higher
the value is, the brighter the floodlight will be.
Color Temperature You can adjust cool or warm color temperature here.
Mode
Floodlight detection modes.
●
Motion Activation: The light turns on when motion is activated.
You can select light duration from 30 s, 60 s, 3 min, 5 min and 15
min. And it is 30 s by default.
●
Manual: The light is off by default. You need to turn it on by
clicking in the live page. And the light will remain on unless
you click again.
●
Schedule: The light turns on as scheduled. Click Settings next
to Period to set the light schedule.
●
PIR Activation: The light turns on only when PIR is detected at
night. You can select light duration from 30 s, 60 s, 3 min, 5 min
and 15 min. And it is 30 s by default.
Step 3 Click Save.
4.5.1.1.13 Splicing Mode
Select the splicing mode to splice several images of different lens to a panoramic image. You can
select Merged Splicing or Splicing for Mode.
Figure 4-47 Splicing mode
4.5.1.2 Profile Management
The surveillance system works in different ways as profile configured in different time.
Procedure
Step 1 Select Setting > Camera > Conditions > Profile Management.
Operation Manual
59