Dahua Technology DH-PFR4K-D300, User Manual

Page: 58 / 101

User’s Manual
52
Select Enable to enable main stream or sub stream multicast, and select the sub
stream from the drop-down list if you enable sub stream multicast.
Enter multicast address and port number. For detailed description, see Table 4-15.
Table 4-15
Multicast parameter descriptions
Parameter Description
Multicast Address
The multicast IP address of main stream and sub stream is 224.1.2.4
by default, and the range is 224.0.0.0–239.255.255.255.
Port
Set the multicast port of corresponding stream.
Main Stream: 40000; Sub Stream1: 40016; Sub Stream2: 40032. All
the range is 1025–65500.
Click Save .
The multicast configuration of TS is similar to RTP, and you can refer to the previous steps.
4.2.10
802.1x
802.1x (port based network access control protocol) supports manual selection of
authentication method. Device can be connected to LAN after passing 802.1 x authentications.
It well supports authentication, charging, safety and management requirement of network.
Select Setting > Network > 802.1x .
The 802.1x interface is displayed. See Figure 4-33.
802.1x
Select Enable to enable 802.1x.
Configure parameters. See Table 4-16.
Table 4-16
802.1x parameter descriptions
Parameter Description
Authentication PEAP (protected EAP protocol).
Username The username that was authenticated on the server.
Password Corresponding password.
Click Save .