User’s Manual
34
If multiple cameras need to be linked, click
PTZ
Camera List
at the upper-left
corner above the live image to switch to another camera, and then repeat
operations.
Enable
Alarm Track
on the interface, and then click
Save
to complete radar
calibration.
4.1.4
Region Management
You can add different types of regions, draw alarm, pre-warning, or shield areas, set arming
periods, filter objects in regions, and more.
Select
Setting > Radar Settings > Region
.
The
Region
interface is displayed. See Figure 4-17.
Region
Click
to add regions, and then select
Enable
check box to enable region
management.
Double-click the name under the
Name
column to modify the region name.
Configure the region type.
Double-click
Pre-warning
under the
Type
column to select region type from
Alarm
(red),
Pre-warning
(yellow), and
Shield
(green). The type with blue background is
selected. Alarm priority: Alarm region > Pre-warning region > Shield region.
For detailed descriptions about alarm rules of different regions, see Table 4-5.
Click
to draw an area within radar detection range.
Click the left mouse button to start drawing lines, and then click the right mouse button
to end the drawing. The beginning and end point will automatically be connected. See
Figure 4-18.
The area you draw can exceed the edge part of the detection region because it might
be difficult to draw accurately.
Summary of Contents for DH-PFR4K-D300
Page 31: ...User s Manual 25 Channel title Time title...
Page 32: ...User s Manual 26 OSD information Font...
Page 101: ...User s Manual...
