Dahua Technology DH-PFR4K-D300, User Manual

Page: 56 / 101

User’s Manual
50
Table 4-14
SNMP parameter descriptions
Parameter Description
Version
Select the check box of the version you need, and the system can
process information of corresponding version.
Select V1, and the system can only process information of V1
version.
Select V2, and the system can only process information of V2
version.
Select V3, and then V1 and V2 become unavailable. You can
configure username, password and authentication type, which
are needed to access radar from the server.
Using V1 and V2 might cause data leakage, and V3 is recommended.
SNMP Port The listening port of the software agent in the radar.
Read Community,
Write Community
The read and write community strings that the software agent
supports.
You can enter number, letter, underline and dash to form the name.
Trap Address
The target address of the trap information sent by the software
agent of the radar.
Trap Port
The target port of the trap information sent by the software agent of
the radar.
Read-only Username
The name is public by default.
You can enter number, letter, and underline to form the name.
Read & write
Username
The name is private by default.
You can enter number, letter, and underline to form the name.
Authentication Type You can select from MD5 and SHA. The default type is MD5.
Authentication
Password
It should be no less than 8 digits.
Encryption Type
The default is CBC-DES .
Encryption Password It should be no less than 8 digits.
Click Save .
View radar information.
Run MIB Builder and MG-SOFT MIB Browser.
Compile the two MIB files with MIB Builder.
Load the generated modules with MG-SOFT MIB Browser.
Enter the IP address of the device you need to manage in the MG-SOFT MIB
Browser, and then select version to search.
Unfold all the tree lists displayed in the MG-SOFT MIB Browser, and then you can
view the configuration information such as video channel and software version.
Use PC with Windows operating system and disable SNMP Trap service. The
MG-SOFT MIB Browser will display prompt when alarm is triggered.