102
Table 6-13 TCP/IP parameters
Parameter
Description
Host Name
Enter the host name, 15 characters at most.
Ethernet Card
Wire (Default)
is set by default.
Mode
●
Static: You need to manually configure
IP Address
,
Subnet Mask
and
Default Gateway
.
●
DHCP: Obtains IP address automatically. With DHCP enabled,
IP
Address
,
Subnet Mask
and
Default Gateway
cannot be
configured. You can check the current IP address whether the
DHCP takes effect or not.
MAC Address
Host’s MAC address, cannot be modified.
IP Version
Select IPv4 or IPv6.
IP Address
Enter the IP address and subnet mask according to your own needs.
All the IPv6 addresses will be validated, so ensure IP address and
subnet mask are in the same network segment, which means the front
parts of the IP address and the default gateway are the same one.
Subnet Mask
Default Gateway
Configure it as needed, the default gateway must be in the same
network segment with the IP address.
Preferred DNS
IP address of the preferred DNS.
Alternate DNS
IP address of the alternate DNS.
