10
-3. Refrigerator Height & Horizontality Adjustment
※ For the optimum appearance and performance of the refrigerator, its height should be adjusted well. (If the floor
the refrigerator is irregular, the doors of the Freezer and the Fridge will look unbalanced.
Insert a (-)driver into the groove of the adjustment
foot on the Freezer and turn it to
the direction of the arrow to adjust the
Horizontality.(Turn it clockwise to heighten the
Freezer door, and turn it
Counterclockwise to lower the door.
Insert a (-)driver into the groove of the adjustment
foot on the Fridge and turn it to the direction of the
arrow to adjust the horizontality.
(Turn it clockwise to heighten the fridge
compartment door, and turn it counterclockwise
to lower the door.
If the door of the Freezer is lower than
that of the Fridge.
If the door of the Fridge is lower than that
of the Freezer.
97
The front section of the door need be a little higher than the rear part so that the
doors can easily be closed. But if the front section gets too higher while you adjust
the door balance, it will be hard to open the doors.
Caution
Summary of Contents for Q600 series
