Daewoo Q600 series, Service Manual

Page: 34 / 112

Contents
1. Freezer Button
2. lock Setup Button 1.FCP LED
1. Starting: At a “Locked” state, press “Lock Setup” 5 times while “Freezer” Button is pressed.
2. Display: The Code for the Error is Displayed using 88 Segment.
3. Cancellation: Press “Lock Function” once.
4. Automatic cancellation: In 4 min. after the starting, it is automatically cancelled.
5. All Error Codes will reset, when it turns to normal state.
6. Error Code Display
6-17. Error Display & Control Method
Control Object Input Parts
33
Error Code
내 용
F1
F-Sensor Disconnection, Short Circuit
At Temperature Display,
a Disconnection is
shown as
“ Lo
”
, Short
Circuit “ Hi
”
r1
R-Sensor Disconnection, Short Circuit
rt
RT-Sensor Disconnection, Short Circuit
d1
D-Sensor Disconnection, Short Circuit
HS
Humidity Sensor Disconnection, Short
Circuit
dr
When R-Door Open is detected for one hr. or longer
dF
When F-Door Open is detected for one hr. or longer
dH
When home-bar Door Open is detected for one hr. or longer
C1
When Comp has run 3 hr. or longer as D Sensor detects -5 ℃ or higher
EP
At a EEPROM Read/Write Error
D2
At A/S forced Mode (ΞΞd2 displayed)
CE
For the Front, no Data from RX for 30 sec.
cE
For the Main, no Data from RX for 30 sec.
d3
At Power consuming forced defrosting
F3
When returning from defrosting by the time limit of 50 min. due to D-
Sensor
Ei
At I-Sensor Disconnection / Short Circuit
Eg
When I-Sensor Temperature does not go up to a certain point after a
water supply