Daewoo Q600 series, Service Manual

Page: 31 / 112

Contents
4. Water-supply Mode
1) If Water-supply mode starts after an Ice Separation, the solenoid valve will be on.
2) Water-supply is made by time: Normal supplying time 5 sec.
3) How to adjust the Water-supply time
(a) Starting of the Adjustment 1:
- (LOCKED State) Press Dispenser Button for 10 sec. to see P0 05 displayed
(b) Starting of the Adjustment 2:
- Press Freezer Dispenser Button 5 times: Error Display Mode started
- Press Freezer Button 5 times: Initially setup Water-supply time P0 05 is displayed
at 88 segment (Meaning 5 sec.)
(c) If you press Dispenser once, P0 05 is displayed (Meaning 5 sec.)
(d) Water-supply time may be up to 22 sec. -> Next to P0 22, P0 03 is set (Minimum supplying
time is 3 sec.)
(Water-supply time 3~10sec. -> Time increases by one sec. for each Dispenser pressing
Water-supply time 10~22sec. -> Time increases by two sec. for each Dispenser pressing)
Water-supply Mode Start
Water-supply solenoid Valve
ON
Water-supply Time> 5 sec.
Water-supply solenoid Valve OFF
Water-supply Mode End
30