Daewoo Q600 series, Service Manual

Page: 24 / 112

Input Parts Control Object
Contents
1. Front PCB Button
2. Door Switch
3. Initial Power Supply
1. Buzzer
1. Buzzer beeps as Front PCB is manipulated.
2. Buzzer beeps 3 sec. after an initial power supply.
3. Buzzer beeps at a power consuming mode forced Defrosting, short-circuit operation, A/S forced Defrosting.
4. Buzzer beeps when you press a button as you are fine-tuning the Freezer
/ Fridge.
5. Buzzer beeps every minute when a Door is open (for 5 min.).
6-11. Buzzer Function
Contents
N/A 1.Comp
6-9. Prevention of Comp Re-start
Control Object Input Parts
1. For 6 min. after Comp is off, it will not re-start even though there is a Comp On condition occurring.
Input Parts Control Object
Contents
1. Main PCB 1. Electronic Units
1. 1 min. Shortening: Click “Fast Key” of Main PCB.
2. 30 min. Shortening: Press “Fast Key” continuously and it will be shortened by 30 min. every 2.5 seconds
with a short buzzer beeping.
3. Usage Example: May be used to shorten unnecessary time.
(6 min. Pause function, Fan Delay function)
6-10. Time Shortening Function
23