Daewoo DAPD17REQ-EC, User Manual

Page: 3 / 50

1. TECHNICAL SPECIFICATIONS
EN
3
1. TECHNICAL SPECIFICATIONS
Models DAPD17REQ-EC DAPD23REG-EC
FUEL TYPE NG.LPG.PETROL
OUTPUT
RATED POWER (GASOLINE) 20 kVA 28.7 kVA
RATED POWER (LPG
）
18.7 kVA 27.5 kVA
RATED POWER (NG
）
17.5 kVA 25 kVA
RATED VOLTV 380 V 230/400 V
RATED CURRENT (GASOLINE
）
30 41,6
RATED CURRENT (LPG
）
27,2 39,9
RATED CURRENT (NG
）
25,4 36,2
PHASE THREE SINGLE [THREE]
Engine/Alternatorm 3000 rpm 3000 rpm
POWER FACTOR 1.0 [0.8] 1.0 [0.8]
ENGINE
ENGINE PART # PD465QR PD470Q1
VOLUMEc 998 cc 1216 c
COMPRESSION RATIO 9.5:1 9.5:1
IGNITION SYSTEM ECM IGNITION ECM IGNITION
ELECTRIC START YES YES
STARTING MOTOR QDY112 12V 0.8KW QDY112 12V 0.8KW
BORE&STROKE L4-70×74 mm×mm L4-70×79 mm×mm
ASPIRATION TYPE NATURAL ASPIRATION NATURAL ASPIRATION
OIL CAPACITY 3,5 L 3,5 L
ROTARY OIL FILTER YES YES
CHARGING METHOD 14V/70 A charging motor 14V/70 A charging motor
RECOMMEND BATTERY
START CURRENT(CCA)
550 A 550 A
COOLING SYSTEM LIQUID COOLED
LOW OIL PRESSURE SHUTDOWN YES
ALTERNATOR
VOLT.REG.SYSTEM AVR
BRUSH BRUSH
POLE 2 2
THD @FULL LOAD ≤ 5% ≤ 5%
INSULATION F F
STATOR WINDING MATERIAL COPPER
ROTOR WINDING MATERIAL COPPER
CONNECTION METHOD DIRECT COUPLING
VOLTAGE STEADY
TYPE ELECTRON
Sensing SINGLE [THREE]
VOLTAGE ADJUSTING ± 1% ± 1%
1. TECHNICAL SPECIFICATIONS 1. TECHNICAL SPECIFICATIONS 1. TECHNICAL SPECIFICATIONS 1. TECHNICAL SPECIFICATIONS
c