EN
14
Lift the unit and lock the casters.
Lift holes.
Iron rod go through the holes and use rope to lift the unit.
6. Battery
Connect battery positive (+) and negative (-) to wire positive and negative side, connect negative (-)
lead last when connecting the battery. The gas generator will not start and circuit board damage
may occur if the battery is connected in reverse.
time use or
<
12.6V should be re-charge then use.
Lift the unit and lock the casters.
Lift holes.
Iron rod go through the holes and use rope to lift the unit.
6. Battery
Connect battery positive (+) and negative (-) to wire positive and negative side, connect negative (-)
lead last when connecting the battery. The gas generator will not start and circuit board damage
may occur if the battery is connected in reverse.
time use or
<
12.6V should be re-charge then use.
Lift the unit and lock the casters.
Lift holes.
Iron rod go through the holes and use rope to lift the unit.
6. Battery
Connect battery positive (+) and negative (-) to wire positive and negative side, connect negative (-)
lead last when connecting the battery. The gas generator will not start and circuit board damage
may occur if the battery is connected in reverse.
time use or
<
12.6V should be re-charge then use.
Lift the unit and lock the casters.
Lift holes.
Iron rod go through the holes and use rope to lift the unit.
6. Battery
Connect battery positive (+) and negative (-) to wire positive and negative side, connect negative (-)
lead last when connecting the battery. The gas generator will not start and circuit board damage
may occur if the battery is connected in reverse.
time use or
<
12.6V should be re-charge then use.
Lift the unit and lock the casters.
Lift holes.
Iron rod go through the holes and use rope to lift the unit.
6. Battery
Connect battery positive (+) and negative (-) to wire positive and negative side, connect negative (-)
lead last when connecting the battery. The gas generator will not start and circuit board damage
may occur if the battery is connected in reverse.
time use or
<
12.6V should be re-charge then use.
Lift the unit and lock the casters.
Lift holes.
Iron rod go through the holes and use rope to lift the unit.
6. Battery
Connect battery positive (+) and negative (-) to wire positive and negative side, connect negative (-)
lead last when connecting the battery. The gas generator will not start and circuit board damage
may occur if the battery is connected in reverse.
time use or
<
12.6V should be re-charge then use.
Summary of Contents for DAPD17REQ-EC
