Daewoo DAPD17REQ-EC, User Manual

Page: 12 / 50

It’s strictly prohibit to remove the high pressure pipe when in maintenance. You must make sure
there’s no leakage before use. If there is no special equipment, you can use soap bubble to test the
gas pipe joints. The observation time is not less than 1 minute.
According to the different gas source of users’, there may be different gas pressure arrange. Make
different needs. You need to use the pressure reducing valve if the pressure is excessively large.
The tools such as pressure gauge are by the users to provide.
level.
4. Natural gas
pressure reducing valve if your fuel supply is with higher pressure.
CAUTION. After installation, users are not allowed to change the gas type. If users want to change
the gas type (NG or LPG), please contact the retailer.
5. Electrical connections
If the gas generator is used for standby power, install an automatic transfer switch (ATS) which is
provided by DAEWOO to prevent inadvertent interconnection of standby and normal sources of
supply. Shut down the gas generator efore servicing the equipment. Never contact electrical leads
or appliances when standing in water or on wet ground because these conditions increase the risk
of electrocution.
It’s strictly prohibit to remove the high pressure pipe when in maintenance. You must make sure
there’s no leakage before use. If there is no special equipment, you can use soap bubble to test the
gas pipe joints. The observation time is not less than 1 minute.
According to the different gas source of users’, there may be different gas pressure arrange. Make
different needs. You need to use the pressure reducing valve if the pressure is excessively large.
The tools such as pressure gauge are by the users to provide.
level.
4. Natural gas
pressure reducing valve if your fuel supply is with higher pressure.
CAUTION. After installation, users are not allowed to change the gas type. If users want to change
the gas type (NG or LPG), please contact the retailer.
5. Electrical connections
If the gas generator is used for standby power, install an automatic transfer switch (ATS) which is
provided by DAEWOO to prevent inadvertent interconnection of standby and normal sources of
supply. Shut down the gas generator efore servicing the equipment. Never contact electrical leads
or appliances when standing in water or on wet ground because these conditions increase the risk
of electrocution.
It’s strictly prohibit to remove the high pressure pipe when in maintenance. You must make sure
there’s no leakage before use. If there is no special equipment, you can use soap bubble to test the
gas pipe joints. The observation time is not less than 1 minute.
According to the different gas source of users’, there may be different gas pressure arrange. Make
different needs. You need to use the pressure reducing valve if the pressure is excessively large.
The tools such as pressure gauge are by the users to provide.
level.
4. Natural gas
pressure reducing valve if your fuel supply is with higher pressure.
CAUTION. After installation, users are not allowed to change the gas type. If users want to change
the gas type (NG or LPG), please contact the retailer.
5. Electrical connections
If the gas generator is used for standby power, install an automatic transfer switch (ATS) which is
provided by DAEWOO to prevent inadvertent interconnection of standby and normal sources of
supply. Shut down the gas generator efore servicing the equipment. Never contact electrical leads
or appliances when standing in water or on wet ground because these conditions increase the risk
of electrocution.
It’s strictly prohibit to remove the high pressure pipe when in maintenance. You must make sure
there’s no leakage before use. If there is no special equipment, you can use soap bubble to test the
gas pipe joints. The observation time is not less than 1 minute.
According to the different gas source of users’, there may be different gas pressure arrange. Make
different needs. You need to use the pressure reducing valve if the pressure is excessively large.
The tools such as pressure gauge are by the users to provide.
level.
4. Natural gas
pressure reducing valve if your fuel supply is with higher pressure.
CAUTION. After installation, users are not allowed to change the gas type. If users want to change
the gas type (NG or LPG), please contact the retailer.
5. Electrical connections
If the gas generator is used for standby power, install an automatic transfer switch (ATS) which is
provided by DAEWOO to prevent inadvertent interconnection of standby and normal sources of
supply. Shut down the gas generator efore servicing the equipment. Never contact electrical leads
or appliances when standing in water or on wet ground because these conditions increase the risk
of electrocution.
EN
12
It’s strictly prohibit to remove the high pressure pipe when in maintenance. You must make sure
there’s no leakage before use. If there is no special equipment, you can use soap bubble to test the
gas pipe joints. The observation time is not less than 1 minute.
According to the different gas source of users’, there may be different gas pressure arrange. Make
different needs. You need to use the pressure reducing valve if the pressure is excessively large.
The tools such as pressure gauge are by the users to provide.
level.
4. Natural gas
pressure reducing valve if your fuel supply is with higher pressure.
CAUTION. After installation, users are not allowed to change the gas type. If users want to change
the gas type (NG or LPG), please contact the retailer.
5. Electrical connections
If the gas generator is used for standby power, install an automatic transfer switch (ATS) which is
provided by DAEWOO to prevent inadvertent interconnection of standby and normal sources of
supply. Shut down the gas generator efore servicing the equipment. Never contact electrical leads
or appliances when standing in water or on wet ground because these conditions increase the risk
of electrocution.
It’s strictly prohibit to remove the high pressure pipe when in maintenance. You must make sure
there’s no leakage before use. If there is no special equipment, you can use soap bubble to test the
gas pipe joints. The observation time is not less than 1 minute.
According to the different gas source of users’, there may be different gas pressure arrange. Make
different needs. You need to use the pressure reducing valve if the pressure is excessively large.
The tools such as pressure gauge are by the users to provide.
level.
4. Natural gas
pressure reducing valve if your fuel supply is with higher pressure.
CAUTION. After installation, users are not allowed to change the gas type. If users want to change
the gas type (NG or LPG), please contact the retailer.
5. Electrical connections
If the gas generator is used for standby power, install an automatic transfer switch (ATS) which is
provided by DAEWOO to prevent inadvertent interconnection of standby and normal sources of
supply. Shut down the gas generator efore servicing the equipment. Never contact electrical leads
or appliances when standing in water or on wet ground because these conditions increase the risk
of electrocution.