Installation
5
1) When you open the package and take out this device, proceed with caution to avoid
causing damages. After you take out this device, check whether or not this device and
the parts are damaged.
2) Install this device on a flat and stable surface.
* To avoid the air flow of this device from being interrupted, install this device in a place,
where the obstacles are at least 30cm away from the vent of this device.
3) Open the water bottle cap located on the rear side of
this device, fill the water bottle with distilled water,
and rotate the cap until it is completely closed.
* When adding distilled water, use a syringe, or
a cup with a sharp spout.
* Check the water level buoy located on the rear-
side of this device.
* When this device is used without completely
closing the cap, the distilled water may spill.
* The maximum volume of distilled water is 250mL.
4) Check the projected section of the water socket
located on the side of this device and connect the
water socket to this device by pushing it in the
correct direction until you hear a “click” sound.
* When this device is used without properly
connecting the tubing with this device, there is
a risk of water leakage.
22
