2-5. Cleaning
2-5-1.
Device cleaning
- When any foreign substance(ex: filth, dust, blood) is attached to this device, turn off this
device, apply a bit of water or neutral detergent to a cloth, and use the cloth to gently
remove the foreign substance.
(There is a risk of discoloration, damage and malfunction.)
(When this device is cleaned, make sure to dry this device completely prior to use.)
- Please be careful to prevent any liquid from going into the air socket or AC inlet on the back
of device. If liquid does get in operation errors, electric shock, and fire could occur due to
do an affect of internal parts.
- Do not wipe the device with benzene, thinner, alcohol, etc or spray water directly on the
device.
(It may cause discoloration, damage, electric shock or fire.)
* Use neutral detergent or the alkalescence for cleaning.
Dilute in water if it is Alkali undiluted state.
Drug use: be careful not to enter into the skin or eyes.
2-5-2.
Wrap cleaning
- When necessary apply a bit of neutral/mild detergent or water to a soft cloth, use the cloth
to clean the wrap, and completely dry the wrap prior to use.
- Close the tubing hole at the bottom with a rubber stopper before cleaning.
(If you do not close the tubing hole with a rubber stopper, there is a risk of contamination
which may cause failure.)
* Do not use a dryer to dry the wrap.
14
