Error Code
Symptom
Solution
Occurs when the
temperature cannot be
adjusted due to failure of
the cooling system
- Contact the service center and local person in
charge.
Occurs when the
temperature cannot be
adjusted due to failure of
the water pump
Occurs when the air sensor
has no load while this
device is in operation
Occurs when no
pressurization is executed
due to air leakage in the
wrap area
- Check whether the wrap/tubing has any air
leakage.
- Disconnect and re-connect the tubing
connected to the wrap and main body.
When the same error occurs, contact the
service center and local person in charge.
Occurs when the
temperature sensor within
this device causes an error
- Contact the service center and local person in
charge.
Occurs when the
temperature sensor within
the heat sink causes an
error
Occurs when the water
temperature sensor causes
an error
Occurs when the pressure
sensor causes an error
Occurs when the IR-Sensor
causes an error
Occurs when the System
overload an error
40
