USER MANUAL
4) When draining, prepare a water container for receiving the drained water.
Set the tubing attached to the wrap in a way that it faces the prepared water container, and
open the pipe by rotating it 90 degrees.
3) Connect the connector tubing supplied with
the wrap pipe.
5) On the Draining standby screen, rotate the knob wheel to select , and press the
knob wheel to drain the water inside this device as well as the water inside the tubing
and wrap.
6) After the Draining process is complete and a pop-up screen appears, press the knob wheel.
On the Draining standby screen, select and press the knob wheel to return to the
menu mode.
* When the water level remains the same during the Draining process, a failure will occur.
* When a failure occurs, check whether or not the tubing and wrap are all connected to
CTC-7, and check whether or not the pipe is open.
33
