26
Semi-Automatic Coffee System
Cleaning the Dispenser Collar
Clean the dispenser collar to ensure proper operation and a good seal
with the coffee dispenser assembly (filter holder).
What to Use
Cleaning brush
A solution of warm water and hand dishwashing soap
One quart pan
How to Clean the Dispenser Collar
Turn off the power switch and allow the coffee
system to cool.
Remove the coffee filter holder from the brewing
compartment.
Use the cleaning brush to remove any loose
grounds from the screen on the bottom of the
dispenser collar and the surrounding area.
Put a one quart pan under the dispensing collar.
Turn on the power switch.
Push the drink dispensing button to remove any remaining coffee
grounds from the collar screen.
V
V
V
1.
2.
3.
4.
5.
6.
Cleaning and Maintenance
WARNING
DO NOT PUSH ANY BUTTONS OR
TURN ANY KNOBS ON THE CONTROL
PANEL UNTIL ALL BODY PARTS
AND CLOTHING ARE CLEAR OF THE
BREWING COMPARTMENT. KEEP
ALL BODY PARTS AWAY FROM THE
BREWING COMPARTMENT WHEN THE
STEAM NOZZLE IS ON. HOT LIQUIDS
AND STEAM CAN CAUSE SEVERE
BURNS.
Removing the Filter Holder
Gasket
Collar
