12
Semi-Automatic Coffee System
Operating Instructions
Loading and Starting the Coffee System
Make sure the drip tray is in place.
1.
Grasp both sides of the front panel and slide the unit out.
On model CM24
T
BISAS (tank version), open the water tank door
and pour filtered water (with a water hardness of 4gpg or less) into
the water tank. The tank holds 1 1/4
gallons (2.5 liters) of water. DO NOT
use distilled water. If you want, you can
remove the tank from the machine to
fill it. To do so, grasp the handles firmly
and pull up. Make sure the outside of
the tank is dry before replacement.
Push down firmly on the handles when
replacing it.
2.
3.
Removing the Water Tank
WARNING
On model CM24
T
BISAS (tank version), clean the
water tank daily to avoid sickness due to bacteria
growth. See page 24.
NOTE:
On the tank version of
the coffee system (model
CM24
T
BISAS), the tank empty
light comes on when the
water tank is nearly empty.
Preparing to Operate Your Coffee System
Drip Tray
Tank Empty Light
IMPORTANT
If using your coffee system for the very
first time, make sure to start it according to
the
First Time Start Up Procedure
in the
installation instructions. The coffee system
will not function properly if not properly
prepared for use the first time.
