CONNECTING AN EXTERNAL RECEIVER (OPTIONAL)
NB
the
normally open (NO)
connector is wired to the
TRIG
or
PED
connector on the Main P.C.Board
Receiver board
To program remotes to the receiver.
1.
press and hold the button on the remote.
2.
Place the jumper over the two TX LEARN pins for 1 second.
3.
Remove the jumper.
4.
Release the button on the remote.
Repeat the above steps for each remote to be programmed.
Connect to TRIG for
full opening or con-
nect to PED for pe-
destrian opening
Bridge com and neg
Summary of Contents for Compact
Page 12: ......
