External Interface
The M8600-WS module provides two external interfaces:
Console port: As the serial communications port, it uses RS-232 interface level and standard RJ-45 connector. This
port is used to connect the serial port of terminal computers running on the background for such tasks as the
debugging, configuration, maintenance, management, and host software loading of the wireless control card.
10/100M MGMT port: As the 10/100BASE-T Ethernet port, it uses RJ-45 connector. This port can be used to connect
the Ethernet port of the background computer for loading programs.
LED
Sign
Description
Detailed information
Status
System LED
OFF: The module is not powered on.
Red: The module is faulty.
Blinking green: The module is initializing. If it keeps blinking, the
module may be faulty.
Solid green: The module has finished initialization and can perform
switching well.
10/100M MGMT
Port LED
Link/ACT
OFF: The port link is not up.
Green: The port link is up at 100 Mbps.
Yellow: The port link is up at 10 Mbps.
Blinking: The port is sending and receiving data.
Specifications
Model
M8600-WS
Standard
Compliance
IEEE 802.3-2005 Ethernet Standard
Port Type
One console port for management, one 10/100M MGMT port, no switching port
Transmission
Medium
None
LED
Status, Link/ACT
Hot Swapping
Supported
Power
Consumption
<90W
EMC Standards
GB9254-2008
Safety Standards
GB4943-2011
Operating
Temperature
0 to 40°C
Storage
Temperature
-40 to 70°C
Operating
Humidity
10% to 90% RH (non-condensing)
Weight
Net weight: 4.5 kg
Dimensions
(L x W x H)
436 mm x 346 mm x 45 mm
M8600-02XFP24SFP/12GT-EC
Module Appearance
Figure 1-36 Appearance of the M8600-02XFP24SFP/12GT-EC
External Interface
The M8600-02XFP24SFP/12GT-EC provides two 10G XFP ports, twelve SFP ports and twelve fiber/copper combo ports.
The SFP ports support the rate of 100/1000 Mbps, the RJ45 ports support auto-negotiation at 10/100/1000 Mbps and the
XFP and SFP optical modules support hot swapping.
LED
Sign
Description
Detailed information
Summary of Contents for RG-S8614
