Link/ACT
Port status LED
RJ45 port:
OFF: The port link is not up.
Green: The port link is up at 1000 Mbps.
Orange: The port link is up at 10/100 Mbps.
Blinking: The port is sending and receiving data.
SFP port:
OFF: The port link is not up.
Green: The port link is up.
Blinking green: The port is sending and receiving data.
Specifications
Model
M8600-24GT/12SFP
Standard
Compliance
IEEE 802.3-2005 Ethernet Standard
Port Type
Twelve 10/100/1000BASE-T RJ45 ports and twelve fiber/copper combo ports.
Transmission
Medium
1000BASE-SX(850nm)
Multi-mode optical fiber
1000BASE-LX(1310nm)
Single-mode optical fiber
1000BASE-LH40(1310nm)
Single-mode optical fiber
1000BASE-ZX(1550nm)
Single-mode optical fiber
10/100/1000BASE-T
Cat-5 UTP
LED
Status, Link/ACT
Hot Swapping
Supported
Power
Consumption
<85W
EMC Standards
GB9254-2008
Safety Standards
GB4943-2011
Operating
Temperature
0 to 40°C
Storage
Temperature
-40 to 70°C
Operating Humidity
10% to 90% RH (non-condensing)
Weight
Net weight: 2.8 kg
Dimensions
(L x W x H)
436 mm x 346 mm x 45 mm
The M8600-24GT/12SFP module provides twelve 10/100/1000BASE-T SFP combo ports. In other words, each SFP
port corresponds to one 10/100/1000BASE-T port combo, and only one port can be used at a time, while the other is
unavailable. The automatic MDI/MDI-X identification of the 10/100/1000M copper ports takes effect only when
auto-negotiation is enabled.
M8600-02XFP
Module Appearance
Figure 1-20 Appearance of the M8600-02XFP
External Interface
M8600-02XFP provides two 10G XFP ports. The XFP optical modules support hot swapping.
LED
Sign
Description
Detailed information
Status
System LED
OFF: The module is not powered on.
Red: The module is faulty.
Blinking green: The module is initializing. If it keeps blinking,
the module may be faulty.
Solid green: The module has finished initialization and can
perform switching well.
Summary of Contents for RG-S8614
