D-Link KVM-410 User Manual
Appendix B - Troubleshooting
Method 2: (For a fixed IP address)
A fixed IP address can also be assigned with the ARP command as
follows:
1. If the KVM-410 is powered on, power it off by unplugging its power adapter cable.
2. Run the ARP command with the following arguments:
arp -s <desired IP address> <KVM-410 MAC address>
The IP address that you assign should be one that is suitable for the network segment that the KVM-410
resides on. The KVM-410 MAC address can be found on its bottom panel.
3. Power on the KVM-410.
4. From your browser, log into the KVM-410 using the IP address you just assigned.
Note:
You must do this within 30 seconds of powering the KVM-410 on.
Method 3: (For a DHCP address)
For computers running Windows, the KVM-410’s DHCP generated IP
address can be determined with the Administrative Tool utility (found on the distribution CD):
1.
Double-click
the AdminTool utility icon on the CD to install the utility on your computer. When the
installation completes, there is a KVM-410 Administrative Tool icon on your desktop.
2.
Double-click
the KVM-410 AdminTool icon. The utility searches the network segment for KVM-410
devices, and displays what it finds in a dialog box similar to the one below:
Summary of Contents for KVM-410 - Single Port KVM Switch
Page 1: ......
