4
D-Link KVM-410 User Manual
Section - Configuration
RADIUS
The KVM-410 supports the use of a RADIUS server for user authentication. The
RADIUS
page contains the parameters
to configure the KVM-410 RADIUS authentication.
1. Check
Enable
in the RADIUS dialog
box.
2. Fill in the
IP Address
and
Service Ports
for the
Primary
and
Alternate RADIUS
Servers
.
3. In the
Timeout
field, set the time that the
KVM-410 waits for a RADIUS Sever reply
before it will time out.
4. In the
Retries
field, set the number of
times to retry RADIUS authentication.
5. In the
Shared Secret
field, enter the shared secret that the KVM-410 will use to authenticate on the RADIUS
server.
Summary of Contents for KVM-410 - Single Port KVM Switch
Page 1: ......
