D-Link KVM-410 User Manual
Section - Configuration
User Station Filtering - MAC Address
To enable MAC filtering for User Stations, Click the
MAC Filter Enable
check box so a check mark appears.
1. Select whether the Filter will
include
or
exclude
specified
User Stations.
2. Click
Add
. A dialog box similar to the one below will
appear:
3. Specify the MAC Address to filter in the dialog box, then
Click OK
.
2. Repeat these steps for any additional MAC Addresses you want to filter.
To delete a filter, select the filter and
Click Remove
.
To modify an existing filter, select it and
Click Edit
. The
Edit
dialog box is similar to the
Add
dialog box. When prompted,
simply delete the old address and replace it with the new one.
To add a Filter:
Summary of Contents for KVM-410 - Single Port KVM Switch
Page 1: ......
