4
D-Link KVM-410 User Manual
Section - Admin Programs
Filtering
There are a maximum of 100 filters allowed for each category: User IP Address; User MAC Address; and Admin
Station Filters. User Station filtered addresses (IPs and MACs) can be allowed or denied by highlighting the item
and clicking the
include
or
exclude
radio buttons. Checking
include
will only allow all the addresses in the filter
range to access the KVM-410, while
exclude
will deny access to all the addresses in the filter range.
User Station Filtering - IP Address
To enable IP filtering for User Stations, Click the
IP Filter Enable
check box so
a check mark appears.
1. Select whether the Filter will include or exclude specified User Stations.
2. Click
Add
. An IP Filter dialog box will appear:
3. Specify the IP Addresses to be filtered, then
Click OK.
Each IP
Filter can consist of a single address, or a range of addresses.
To add a Filter:
4. To filter a single IP Address, enter the same
To IP Address
as the
From
IP Address
. To filter a range of addresses, enter the last IP
Address of the range.
Click OK
.
5. Repeat these steps for any additional IP Addresses or ranges or addresses you want to filter.
Summary of Contents for KVM-410 - Single Port KVM Switch
Page 1: ......
