1
D-Link KVM-410 User Manual
Section - Configuration
Configuration
This section will explain how to configure the KVM-410 from an Internet browser or using a Windows utility program.
Logging In
To configure the KVM-410 from an Internet browser, begin by logging in. The KVM-410 is set to obtain an IP Address
through DHCP by default, however, if it doesn’t obtain an IP Address after 30 seconds, the KVM-410 automatically sets
its IP address to 192.168.0.60.
If you cannot determine the IP Address of the KVM-410, install the Administrative Tool software utility included on the
product CD (see p. 46) or refer to the troubleshooting section IP Address Determination on page 81 of this manual for
assistance.
3.
Click Yes
to accept the certificate, and
Click Yes
again if a second alert appears.
2. A Security Alert dialog box appears:
1. Open a web browser and in the address bar, enter
the IP Address of the KVM-410:
Summary of Contents for KVM-410 - Single Port KVM Switch
Page 1: ......
