D-Link KVM-410 User Manual
Section - Configuration
3. Specify the first IP Address to be filtered, then
Click OK.
Each IP Filter can consist of a single address, or a
range of addresses. A second dialogue box similar to the one below will appear:
4. To filter a single IP Address, enter the same IP Address as the start IP Address. To filter a range of addresses,
enter the last IP Address of the range.
Click OK
.
5. Repeat these steps for any additional IP Addresses or ranges of addresses you want to filter.
To delete a filter, select the filter and
Click Remove
.
To modify an existing filter, select it and
Click Edit
. The
Edit
dialog box is similar to the
Add
dialog box. When prompted,
simply delete the old address and replace it with the new one.
Summary of Contents for KVM-410 - Single Port KVM Switch
Page 1: ......
