D-Link ENW-3503, User Manual

Page: 29 / 64

4.DRIVERS INFORMATION
PLANET ENW-3503 User's Manual 4-1
4. DRIVERS INFORMATION
4.1. Notes for NDIS Driver
The following are examples of CONFIG.SYS file and
AUTOEXEC.BAT for loading System Soft’s Card Services
and NDIS2 driver:
Examples of CONFIG.SYS file:
device=c:\cardsoft \ss365sl.exe
device=c:\cardsoft \cs.exe
device=c:\cardsoft \csalloc.exe c:\cardsoft\csalloc.ini
device=c:\lanman.dos\drivers\ethernet\lm28\carden.exe /iop=nnn /irq=n
/com=n /mir=n
device=c:\cardsoft \cardid.exe
device=c:\lanman.dos\deivers\protman.dos /i:c:\lanman.dos
device=c:\lanman.dos\drivers\ethernet\lm28\lmndis.dos
Examples of partial AUTOEXEC.BAT file:
set path= c:\lanman.dos\netprog;%path%
net start workstation
load netbeui
The Ethernet function configuration information for the DOS
NDIS driver is contained in the PROTOCOL.INI file. To
make allowances for passing the requested modem COM port
(1,2,3,4) to the driver, there has been another field added. The
section of the PROTOCOL.INI file that contains configuration
information for this card must begin with
[LMNDIS_NIF] .
The valid entries in the file are listed below:
[LMNDIS_NIF]
DRIVERNAME - LMNDIS$