D-Link ENW-3503, User Manual

Page: 30 / 64

3 MODEM BASICS
LAN + Fax/ Modem PC Card 4-2
This line must always be presend
IOADDRESS - value
where value is one of the following address:
0x300, 0x320, 0x340, 0x360.
The leading 0x for the hex notation is required.
To have Card Services select the address base from it's pool of available address then use a value of 0.
INTERRUPT - value
where values is one of the following interrupts:
3, 4, 5, 7, 9, 10, 11, 12, 15.
To have Card Services select an available interrupt resource
then place a value of 0 at this location.
4.2. Notes for Packet Driver
The following are examples of CONFIG.SYS file for loading
System Soft’s Card Services and packet driver:
Examples of partial CONFIG.SYS file:
device=c:\cardsoft\ss365sl.exe
device=c:\cardsoft\cs.exe
device=c:\cardsoft\csalloc.exe c:\cardsoft\csalloc.ini
device=c:\tcpip\carden.exe /iop=nnn /irq=n /com=n /mir=n
device=c:\cardsoft\cardid.exe
device=c:\tcpip\lmpd.com
4.3. Notes for Windows For Workgroups
After installation of the multi-function PCMCIA card drivers,
the system will automatically update both CONFIG.SYS and
AUTOEXEC.BAT for you so that the driver will be loaded
upon system start up. When modifying the two files, the
system will make copies named CONFIG.ABO and
AUTOEXEC.ABO in the system's directory. If the driver of